Machine Description

The Angle-Max 1.6 machine is used to produce angle stock for flat oval and round flanges.  Producing 90 degree angles from coil stock, the Angle-Max automatically cuts to a desired length and features complete PLC controls and touch screen for easy operation.  Switching between 90° flange sizes requires no tooling changeover and minimal adjust on right-hand side of machine.  The Angle-Max produces parts that are a perfect fit to be used with the Max-Flange 2.7 flanging machine.

Optical TDC or TDE-type flange as well as 1/8 diameter pilot hole punching available.

Machine Details:

  • Material Thickness: 24 – 16 gauge (0.7mm – 161mm) Galv.
  • Length: 20” – 320” (508mm – 8130mm)
  • Forming Speed: 45 FOM (14 m/min)
  • Motor Voltage: 10 HP, 460V (14 Amp), 3 phase, 60 Hz.
  • Air Consumption: 5 CFM @ 100 PSI without pilot hole punch, 15 CFM @ 100 PSI with pilot hole punch
  • Dimensions (L x W x H): 99” x 42” x 47”

Product Details:

  • 5” x 1.5” (38 mm x 38 mm), Strip Width – 3-1/8”
  • 5” x 2.5” (38 mm x 63.5 mm), Strip With – 4-1/8”
  • AND 5” x 2.5” (63.5 mm x 63.5 mm), Strip Width – 5-1/8”

Copyright 2016 Mestek Machinery | All Rights Reserved